The Bissell ProHeat Pet Carpet Cleaner is a powerful and effective machine that can help you keep your carpets clean and free of pet hair, dander, and stains. With its advanced cleaning system, the ProHeat Pet can remove even the toughest dirt and grime, leaving your carpets looking and smelling their best.
To use the Bissell ProHeat Pet Carpet Cleaner, first fill the clean water tank with hot water and add the appropriate amount of cleaning solution. Then, attach the cleaning head to the machine and select the desired cleaning mode. The ProHeat Pet offers three cleaning modes: Express Clean, Deep Clean, and Rinse Only. Express Clean is a quick and easy cleaning option that is ideal for everyday use. Deep Clean is a more thorough cleaning option that is perfect for removing tough dirt and stains. Rinse Only is used to rinse the carpets after cleaning.
Once you have selected the desired cleaning mode, simply pull the trigger on the cleaning head and start cleaning. The ProHeat Pet will automatically dispense the cleaning solution and water onto the carpets, and the rotating brushes will scrub the carpets clean. As you clean, the ProHeat Pet will extract the dirty water and cleaning solution from the carpets, leaving them clean and fresh. When you are finished cleaning, simply empty the dirty water tank and rinse the machine with clean water.
Assembling Your Bissell Proheat Pet Carpet Cleaner
Assembling your Bissell Proheat Pet Carpet Cleaner is a simple process that should take no more than 15 minutes. Follow these steps to get started:
### 1. Unpack the cleaner and remove all parts from the box.
The following parts should be included:
Part | Description |
---|---|
Cleaner base | The main part of the cleaner that houses the motor, pump, and other components. |
Handle | The part that you hold to operate the cleaner. |
Cleaning head | The part that dispenses the cleaning solution and suctions up the dirty water. |
Water tank | The part that holds the clean water and cleaning solution. |
Dirty water tank | The part that holds the dirty water. |
### 2. Attach the handle to the cleaner base.
Locate the two connection points on the front of the cleaner base. Align the holes in the handle with the connection points and push the handle into place until it clicks.
### 3. Attach the cleaning head to the handle.
Locate the two release buttons on the bottom of the handle. Press the buttons and slide the cleaning head onto the handle until it clicks into place.
### 4. Fill the water tank with hot water and cleaning solution.
Remove the water tank from the cleaner base. Fill the tank with hot water to the fill line. Add the recommended amount of Bissell Proheat Pet Carpet Cleaner solution to the tank. Replace the water tank on the cleaner base.
Filling the Solution Tank
Before cleaning your carpets, you need to fill the solution tank with the appropriate cleaning solution.
To do this, follow these steps:
- Locate the solution tank on the front of the machine. It is typically a large, clear tank with a blue lid.
- Open the lid by pushing down on the tab at the top.
- Fill the tank with hot water up to the fill line. Do not overfill the tank, or the machine may not work properly.
- Screw on the lid tightly.
- Add the appropriate amount of cleaning solution to the solution tank. The amount of solution you need to add will vary depending on the type of cleaning solution you are using.
- Refer to the table below for the correct amount of cleaning solution to use.
- For really stubborn stains, you may need to apply more pre-treatment solution or allow it to sit for longer.
- If you don’t have a pre-treatment solution, you can make your own using one teaspoon of dish soap mixed with two cups of warm water.
- Be sure to test the pre-treatment solution in an inconspicuous area first to make sure it doesn’t damage your carpet.
- Use a dryer or fan to accelerate the drying process.
- Do not over-wet the carpet. Excessive moisture can damage the carpet or cause mold growth.
- Avoid walking on the carpet until it is completely dry.
- Refer to the Bissell ProHeat Pet Carpet Cleaner user manual for specific instructions and precautions.
- Prepare the carpet cleaner:
- Vacuum the carpet:
- Test the carpet cleaner:
- Start cleaning:
- Rinse the carpet:
- Dry the carpet:
- Additional tips for removing pet hair and debris:
- Clean the Nozzle Jets: Use the included nozzle cleaning tool to remove any clogs that may affect cleaning efficiency.
- Descale the Machine: Run the carpet cleaner with a descaling solution to remove mineral deposits that can accumulate over time.
- Replace the Carpet Cleaner Solution: If the cleaning solution becomes cloudy or discolored, replace it with a fresh solution.
- Ensure the solution tank is full and properly inserted.
- Check if the hose is kinked or blocked.
- Clean the nozzle and spray tip with the provided tool.
- Replace the spray tip if damaged.
- Inspect the dirty water tank for debris and empty it regularly.
- Clean the suction hose and foot to remove any blockages.
- Ensure the squeegee blades are not worn or damaged.
- Check the belt for tension and replace if necessary.
- Identify the source of the leak (tank, hose, foot).
- Tighten loose connections or replace damaged parts.
- Check the gaskets and seals for wear and tear.
- Ensure there is adequate ventilation around the cleaner.
- Allow the cleaner to cool down for 30 minutes after each use.
- Check if the motor is overheating and replace if necessary.
- Inspect the brushes and rollers for debris or obstructions.
- Clean or replace the brushes and rollers if worn.
- Check for loose or damaged parts and tighten or replace accordingly.
- Use the appropriate cleaning solution for the type of carpet.
- Pre-treat heavily soiled areas before cleaning.
- Make multiple passes over the carpet.
- Check the brushes and rollers for wear and replace if necessary.
- Run the cleaner over the carpet a few more times to extract more water.
- Place fans or a dehumidifier near the carpet to speed up drying.
- Avoid walking on the carpet until it is completely dry.
Using the Cleaning Solution
The Bissell Proheat Pet Carpet Cleaner comes with a variety of cleaning solutions that are designed to remove specific types of stains and dirt.
To use the cleaning solution, follow these steps:
| Cleaning Solution | Amount to Add |
|—|—|
| Bissell Proheat 2X Pet Formula | 4 ounces per gallon of water |
| Bissell Proheat Advanced Pet Formula | 2 ounces per gallon of water |
| Bissell Proheat Oxy Boost Pet Formula | 1 ounce per gallon of water |
Selecting the Correct Cleaning Mode
Rug Cleaning Mode
Select the “Rug Cleaning” mode for cleaning area rugs or carpets with delicate fibers. This mode uses a gentle cleaning solution and lower water pressure to prevent damage to the rug’s materials.
Upholstery Cleaning Mode
Use the “Upholstery Cleaning” mode to clean upholstered surfaces such as sofas, chairs, and curtains. This mode employs a special upholstery tool and a cleaning solution designed for fabrics.
Deep Cleaning Mode
For deep cleaning heavily soiled carpets, select the “Deep Cleaning” mode. This mode uses a concentrated cleaning solution and high water pressure to remove stubborn dirt and stains. It is recommended to use this mode for periodic deep cleaning of carpets.
To further customize the cleaning process, the Bissell ProHeat Pet Carpet Cleaner offers additional options within each mode:
Option | Description |
---|---|
Express Clean | A quick cleaning option for lightly soiled carpets. |
Heavy Traffic | A powerful cleaning option for heavily trafficked areas. |
Pet Odor Eliminator | A specialized setting that targets and removes pet odors. |
Pretreating High-Traffic Areas
Before giving your carpet a deep clean, it’s important to pretreat heavily soiled areas, such as those popular with your furry friends. By doing so, you’ll increase the chances of removing all the dirt and stains that accumulate in these high-traffic zones.
To pretreat high-traffic areas, follow these steps:
1. Identify the high-traffic areas in your carpet. These are typically areas where people and pets walk or play the most, such as hallways, entryways, and around furniture.
2. Fill the small tank on the Bissell ProHeat Pet Carpet Cleaner with the pre-treatment solution provided or make your solution with one teaspoon of dish soap mixed with two cups of warm water.
3. Spray the pre-treatment solution onto the high-traffic areas, making sure to cover them completely.
4. Allow the pre-treatment solution to sit on the carpet for 5-10 minutes. This will give the solution time to penetrate the fibers and loosen the dirt and stains.
Tips for Pretreating High-Traffic Areas |
---|
|
|
|
Using the Deep Clean Mode
This mode is ideal for heavily soiled or pet-infested carpets.
1. **Prepare the carpet cleaner.** Fill the clean water tank with hot tap water and add the recommended amount of Bissell ProHeat Pet cleaning solution. Empty the dirty water tank and reinsert into the carpet cleaner.
2. **Select the Deep Clean Mode.** Press the “Mode” button on the carpet cleaner to select the Deep Clean Mode.
3. **Position the carpet cleaner.** Place the carpet cleaner on the carpet area to be cleaned.
4. **Begin cleaning.** Slowly push the carpet cleaner forward and back, overlapping your strokes slightly. The Deep Clean Mode uses a powerful jet-spray action to penetrate deep into the carpet fibers and remove embedded dirt and stains.
5. **Rinse the carpet.** After cleaning, hold the carpet cleaner over the carpet area and press the “Rinse” button. This will release clean water to rinse the carpet and remove any cleaning solution residue.
**Tips:**
Deodorizing Carpets
To effectively deodorize carpets with your Bissell ProHeat Pet Carpet Cleaner, follow these steps:
1. Prepare the Carpet:
Vacuum the carpet thoroughly to remove loose dirt and debris.
2. Make a Cleaning Solution:
Fill the clean water tank with hot tap water and add the appropriate amount of Bissell Pet Pro Oxy formula, according to the instructions on the bottle.
3. Attach the Pet Pro Tool:
Connect the Pet Pro tool to the end of the cleaning hose.
4. Begin Cleaning:
Start cleaning the carpet from the farthest corner, working in small sections. Point the Pet Pro tool towards the stains or areas that require deodorizing.
5. Allow to Dry:
After cleaning, allow the carpet to dry completely. This can take several hours, depending on the humidity and temperature of the room.
6. Refreshing the Carpet with Febreeze Air Effects:
To enhance the deodorizing effect, consider using Febreeze Air Effects. Fill the provided tank with the Febreeze solution and attach it to the back of the cleaner. As you clean, the Febreeze will be released, leaving your carpets feeling refreshed and odor-free.
Febreeze Air Effects | Benefits |
---|---|
Fresh Air | Neutralizes odors and leaves a light, clean scent |
Gain Original | Leaves a comforting, laundry-fresh scent |
Unstopables Fresh | Releases a vibrant, long-lasting scent |
Removing Pet Hair and Debris
The Bissell Proheat Pet carpet cleaner is a powerful tool for removing pet hair and debris from your carpets. Here are the steps on how to use it effectively:
Fill the clean water tank with hot water and add the recommended amount of pet carpet cleaning solution. Attach the carpet cleaning tool to the hose.
Before using the carpet cleaner, vacuum the carpet thoroughly to remove loose hair and debris.
Select a small, inconspicuous area of the carpet to test the carpet cleaner. This will ensure that the cleaning solution does not damage your carpet.
Begin cleaning the carpet from the furthest corner of the room. Hold the carpet cleaning tool firmly against the carpet and move it back and forth in overlapping strokes.
Once you have finished cleaning the carpet, rinse it thoroughly with clean water. This will remove any remaining cleaning solution or debris.
Turn on the carpet cleaner’s drying fan to dry the carpet. You can also use a fan or open windows to speed up the drying process.
Tip | Details |
---|---|
Use the pet hair tool | The Bissell Proheat Pet carpet cleaner comes with a pet hair tool that is specifically designed for removing pet hair. |
Vacuum frequently | Vacuum your carpets frequently to prevent pet hair and debris from accumulating. |
Brush your pet regularly | Brushing your pet regularly will help to reduce the amount of hair that they shed. |
Maintaining Your Bissell Proheat Pet Carpet Cleaner
Regular maintenance is crucial to keep your Bissell Proheat Pet Carpet Cleaner in optimal condition and extend its lifespan.
Here are eight key maintenance steps to follow:
1. Empty the Clean Water Tank and Rinse
After each use, empty the clean water tank and rinse it thoroughly to remove any leftover cleaning solution or debris.
2. Empty the Dirty Water Tank
After each use, empty the dirty water tank and rinse it to prevent mold and bacteria growth.
3. Wash the Dirt Tank Filter
Clean the dirt tank filter regularly to maintain optimal suction and cleaning performance. Rinse it with clean water until the water runs clear.
4. Clean the Brush Roller
Remove any hair or debris that may have wrapped around the brush roller. Use scissors to cut away any stubborn tangles.
5. Check the Belts
Inspect the drive belts occasionally for signs of wear or damage. Replace them if necessary to ensure smooth operation.
6. Lubricate the Pump
Apply a few drops of silicone lubricant to the pump housing to keep it operating smoothly.
7. Clean the External Surfaces
Wipe down the carpet cleaner’s exterior with a damp cloth to remove dirt and grime.
8. Advanced Maintenance (Optional)
For optimal performance, consider performing the following advanced maintenance tasks every 6-12 months:
Maintenance Task | Frequency |
---|---|
Empty Clean Water Tank | After each use |
Empty Dirty Water Tank | After each use |
Wash Dirt Tank Filter | After each use |
Clean Brush Roller | As needed |
Check Belts | Occasionally |
Lubricate the Pump | Occasionally |
Clean External Surfaces | As needed |
Clean Nozzle Jets | Every 6-12 months |
Descale the Machine | Every 6-12 months |
Replace Carpet Cleaner Solution | When solution becomes cloudy |
Troubleshooting Common Issues
The cleaner is not spraying solution
The cleaner is not picking up water
The cleaner is leaking water
The cleaner is overheating
The cleaner is making loud noises
The cleaner is not cleaning the carpet effectively
The carpet is still wet after cleaning
Error codes on the cleaner display
Error Code | Meaning | Solution |
---|---|---|
E1 | Low water level | Refill the solution tank |
E2 | No solution flow | Check the hose and spray tip |
E3 | Overheating | Allow the cleaner to cool down |
E4 | Motor failure | Contact Bissell customer support |
E5 | Sensor error | Reset the cleaner by unplugging and plugging it back in |
Tips for Optimal Carpet Cleaning Results
1. Pre-Treat Heavily Soiled Areas
Use the spot cleaner attachment to target heavily soiled spots before deep cleaning the entire carpet.
2. Vacuum Thoroughly
Remove loose dirt and debris by vacuuming before using the carpet cleaner to improve cleaning effectiveness.
3. Fill the Clean Water Tank
Fill the clean water tank with hot water and add the recommended amount of cleaning solution.
4. Choose the Correct Settings
Select the appropriate cleaning mode for the carpet type, adjusting the suction and brush agitation as needed.
5. Test an Inconspicuous Area First
Test the cleaning solution on an inconspicuous area to ensure it does not damage or discolor the carpet.
6. Use a Slow, Overlapping Motion
Move the carpet cleaner slowly over the carpet, overlapping areas to ensure even cleaning.
7. Rinse Thoroughly
After cleaning, rinse the carpet with clean water to remove cleaning solution residue.
8. Use a Drying Fan
Placement of a fan near the cleaned area aids in drying and prevents mold buildup.
9. Avoid Over-Saturating
Over-saturating the carpet can lead to excessive drying time and potential damage.
10. Professional Carpet Cleaning
For optimal carpet cleaning results, consider hiring a professional carpet cleaner regularly for deep cleaning and maintenance to extend the carpet’s lifespan.
How To Use Bissell Proheat Pet Carpet Cleaner
The Bissell Proheat Pet Carpet Cleaner is a powerful and effective carpet cleaner that is ideal for homes with pets. It uses a combination of heat, water, and cleaning solution to remove dirt, stains, and odors from carpets. The Bissell Proheat Pet Carpet Cleaner is easy to use and can be used to clean both low-pile and high-pile carpets.
To use the Bissell Proheat Pet Carpet Cleaner, first fill the clean water tank with hot water. Then, add the cleaning solution to the solution tank. Attach the cleaning hose to the carpet cleaner and plug it into an electrical outlet. Turn on the carpet cleaner and select the desired cleaning mode. Slowly move the carpet cleaner back and forth over the carpet, taking care not to overwet the carpet. When you are finished cleaning, empty the dirty water tank and rinse the carpet cleaner with clean water.
People Also Ask
What is the best way to clean pet stains from carpets?
The best way to clean pet stains from carpets is to use a carpet cleaner that is specifically designed for pet stains. These carpet cleaners contain enzymes that help to break down the proteins in pet urine and feces. Follow the directions on the carpet cleaner label to clean the pet stains.
How often should I clean my carpets?
The frequency with which you should clean your carpets depends on the amount of traffic your carpets receive. If you have pets or children, you may need to clean your carpets more often. In general, it is a good idea to clean your carpets at least once every six months.
Can I use the Bissell Proheat Pet Carpet Cleaner on upholstery?
Yes, you can use the Bissell Proheat Pet Carpet Cleaner on upholstery. However, you should first test the carpet cleaner on an inconspicuous area of the upholstery to make sure that it does not damage the fabric.