Are you tired of your iPhone 11’s silence? Do you often miss important calls because your phone is on silent mode? If so, it’s time to learn how to turn on the ringer on your iPhone 11. This simple guide will walk you through the steps to ensure that you never miss a call again. Whether you’re new to the iPhone or just need a refresher, this article will have you up and running in no time.
The first step to turning on the ringer on your iPhone 11 is to locate the ringer switch. This switch is located on the left side of the phone, above the volume buttons. The switch should be in the down position, which is the silent mode. To turn on the ringer, simply slide the switch up to the up position. You will hear a click when the ringer is turned on. If the switch is already in the up position, then the ringer is already on.
Once the ringer is turned on, you can adjust the volume of the ringer using the volume buttons on the left side of the phone. The volume buttons are located below the ringer switch. To increase the volume, press the up volume button. To decrease the volume, press the down volume button. You can also use the volume slider in the Control Center to adjust the ringer volume. To open the Control Center, swipe up from the bottom of the screen. The volume slider is located in the top-right corner of the Control Center.
Activating the Ringer Switch
The ringer switch, located on the left side of your iPhone 11, allows you to quickly toggle between ringer and silent modes. When the switch is flipped toward the back of the device, ringer mode is activated. Here’s a detailed guide on locating and using the ringer switch:
- Identify the Ringer Switch: The ringer switch is a small, toggle-like button located on the upper left side of your iPhone 11, just above the volume buttons. It has two positions: toward the front for silent mode and toward the back for ringer mode.
- Check the Position: To activate the ringer mode, ensure that the ringer switch is flipped toward the back of the device, away from the screen. When the switch is in this position, you should see a red or orange stripe near the switch, indicating that ringer mode is active.
- Flip the Switch: If the ringer switch is not already flipped toward the back, use your finger or a small object to gently slide the switch upward. You should feel a slight resistance as you push it, and the switch should move to the ringer mode position.
Once the ringer switch is flipped to the correct position, your iPhone 11 will be in ringer mode, and you will hear audible notifications for calls, messages, and other alerts.
Additional Tips:
- If you’re still not hearing notifications even with the ringer switch activated, check other settings like the volume levels and mute buttons.
- You can also set your iPhone to vibrate in ringer mode by enabling the “Vibrate on Ring” option in the Settings app under “Sounds & Haptics.”
Using Control Center
The Control Center is a quick and convenient way to access various settings on your iPhone 11, including the ringer volume. To use the Control Center to turn on the ringer, follow these steps:
- Swipe down from the top-right corner of the screen to open the Control Center.
- Locate the audio volume slider, which is represented by a bell icon. If the slider is turned down, the ringer is off. To turn it on, drag the slider upwards.
- Once the slider is in the desired position, the ringer volume will be adjusted accordingly. You can also use the volume buttons on the side of the iPhone 11 to adjust the ringer volume.
Here is a table summarizing the steps involved in turning on the ringer using the Control Center:
| Step | Action |
|---|---|
| 1 | Swipe down from the top-right corner of the screen. |
| 2 | Locate the audio volume slider. |
| 3 | Drag the slider upwards to increase the ringer volume. |
Adjusting Ringer Volume
To adjust your ringer volume, follow these steps:
- Turn on the device
- Press and hold the volume button on the right side of the device
- Slide the volume bar up or down to adjust the ringer volume
- Release the volume button when you are satisfied with the volume level
Here is a detailed guide on how to change the ringer volume on an iPhone 11:
Using the Volume Buttons
1. Locate the Volume Up and Volume Down buttons on the side of your iPhone.
2. Press and hold the Volume Up button to increase the ringer volume.
3. Press and hold the Volume Down button to decrease the ringer volume.
4. Continue pressing the buttons until you reach the desired volume level.
Using the Settings App
1. Open the Settings app on your iPhone.
2. Tap “Sounds & Haptics.”
3. Adjust the “Ringer and Alerts” volume slider to the desired level.
Using Siri
1. Activate Siri by saying “Hey Siri” or pressing the Side button.
2. Say “Increase the ringer volume” or “Decrease the ringer volume.”
3. Siri will adjust the volume accordingly.
Remember that these steps may vary slightly depending on the iOS version installed on your iPhone.
Troubleshooting Silenced Calls
If you’re missing calls on your iPhone 11, even when the ringer is turned on, there might be another reason why your phone isn’t making a sound. Here are a few things to check and troubleshoot:
1. Do Not Disturb (DND) mode: Ensure that DND mode is turned off. When DND is active, it will silence all calls and notifications, except for those that you allow in the Settings app.
2. Silent switch: Check the physical silent switch on the side of your iPhone. If the switch is set to the silent position, your phone will not make any sound for calls or notifications.
3. Focus mode: There might be a specific Focus mode enabled that is silencing calls. Check your Focus mode settings and ensure that the mode you’re using allows calls.
4. Audio playback: If you have earphones or headphones connected to your iPhone, make sure they are not playing audio at a high volume. When connected headphones are playing audio, your iPhone will automatically silence incoming calls unless you have specifically enabled audio to play through your device’s speakers.
Here’s a table summarizing the potential issues and corresponding troubleshooting steps for silenced calls on the iPhone 11:
| Issue | Troubleshooting Steps |
|---|---|
| Do Not Disturb (DND) mode | Turn off DND mode in the Settings app |
| Silent switch | Move the physical silent switch to the “off” position |
| Focus mode | Check Focus mode settings and disable any modes that silence calls |
| Audio playback | Disconnect headphones or earphones, or adjust their volume to a lower level |
Modifying Focus Settings
Focus mode on the iPhone 11 allows you to customize how your phone responds to notifications, calls, and messages based on your current activity or location. To turn on the ringer when in Focus mode, follow these steps:
1. Open the Settings app.
2. Tap on “Focus”.
3. Select the Focus mode you want to customize (e.g., Do Not Disturb, Sleep, Work).
4. Tap on “Notifications”.
5. Under “Allowed Notifications”, select the “All Notifications” option or choose specific apps that you want to allow notifications from.
You can also choose to allow time-sensitive notifications, such as phone calls or messages from certain contacts, to bypass Focus mode by enabling the “Time-Sensitive Notifications” option.
6. Tap on the “Ringer” option.
7. Select “Allow” to turn on the ringer for that Focus mode.
Disabling Do Not Disturb Mode
Do Not Disturb is a feature on the iPhone that silences all calls, notifications, and alerts. If your iPhone is in Do Not Disturb mode, the ringer will be turned off. To turn on the ringer, you must first disable Do Not Disturb.
To disable Do Not Disturb, you can use the Control Center or the Settings app.
To use the Control Center, swipe down from the top-right corner of your screen. Tap the moon icon to toggle Do Not Disturb on or off.
To use the Settings app, open the app and tap “Do Not Disturb.” Toggle the “Scheduled” and “Manual” options to turn Do Not Disturb off.
| Select Settings | Choose “Do Not Disturb” | Toggle “Scheduled” & “Manual” to disable |
|---|---|---|
 |
 |
 |
Alternatively, disabling Do Not Disturb also allows you to turn on the ringer on your iPhone 11. Besides using the Control Center or Settings app, you may additionally toggle the physical switch located on the side of your device.
Once Do Not Disturb has been disabled, you can turn on the ringer by using the Volume Up button or the Ringer switch. The Ringer switch is located on the left side of the iPhone 11. When the Ringer switch is turned on, the ringer will be enabled for all incoming calls and notifications.
Checking Ringer and Vibrate Settings
To ensure your iPhone 11 rings as desired, checking and adjusting its ringer and vibrate settings is crucial. Follow these steps:
1. Open Settings
Tap on the “Settings” icon on your home screen.
2. Navigate to Sounds & Haptics
Scroll down and select “Sounds & Haptics” from the settings menu.
3. Check Ringer Volume
Under the “Ringer and Alerts” section, adjust the slider to set the desired ringer volume.
4. Toggle Vibrate Option
Locate the “Vibrate on Ring” option and toggle it to “On” if you want your phone to vibrate when it rings.
5. Choose Ringer Sound
Tap on “Ringtone” to select the desired ringtone for your incoming calls.
6. Adjust Silent Mode
Ensure the switch labeled “Silent Mode” is turned off to allow audible ringtones.
7. Customizing Vibrate Patterns
Customize the vibration pattern for specific contacts or callers:
| Steps | Action |
|---|---|
| Open Contacts | Locate the desired contact and tap on their name. |
| Edit Contact | Tap on “Edit” in the top-right corner. |
| Choose Ringtone | Scroll down and tap on “Ringtone.” |
| Tap Vibration | Select “Vibration” from the list of options. |
| Create Custom Pattern | Tap on “Create New Vibration” to create a unique vibration pattern. |
| Tap Done | Tap on “Done” to save the changes. |
Updating to the Latest iOS Version
1. Connect to Wi-Fi or Cellular Data
Ensure your iPhone 11 is connected to a stable internet connection via Wi-Fi or cellular data.
2. Open Settings
Tap the “Settings” icon on your iPhone’s home screen.
3. Navigate to General
Scroll down and tap on “General” from the settings menu.
4. Check for Updates
Select “Software Update” under the General settings.
5. Download the Update (if available)
If an update is available, tap “Download and Install.” The download process may take some time.
6. Enter Passcode
If prompted, enter your iPhone’s passcode to authorize the update installation.
7. Accept the Terms and Conditions
Read and agree to the software update terms and conditions before proceeding.
8. Install the Update
The update will begin to install automatically. During this process, your iPhone may restart several times, and the screen may go black for a period of time. Do not interrupt the update process.
Note: If the update process is interrupted, you may need to repeat the steps to ensure a successful installation.
| iOS Version | Ringer On |
|---|---|
| iOS 15 and later | Side button or ringer switch |
| iOS 14 and earlier | Ringer switch |
Contacting Apple Support
If you’re experiencing difficulties turning on the ringer on your iPhone 11, you can contact Apple Support for assistance. Here are the steps to get in touch with them:
-
**Via phone:**
Region Phone Number United States 1-800-MY-APPLE (1-800-692-7753) Canada 1-800-263-3394 United Kingdom 0800 048 0408 -
**Via online chat:**
Visit the Apple Support website here
-
**Via email:**
Send an email to support@apple.com.
-
**Via the Apple Support app:**
Download the Apple Support app from the App Store and follow the instructions to contact a support representative.
When contacting Apple Support, be prepared to provide the following information:
-
Your iPhone 11 model and iOS version
-
A description of the issue you’re experiencing
-
Any troubleshooting steps you’ve already taken
1. Go to the Settings app
Locate and tap on the gear-shaped Settings app on your iPhone 11’s home screen.
2. Tap “Sounds & Haptics”
Scroll down and select the “Sounds & Haptics” option within the Settings menu.
3. Adjust the Ringer Volume Slider
Under the “Ringer and Alerts” section, find and drag the slider to the right to increase the ringer volume.
4. Check the Silent Mode Switch
Ensure that the physical Silent Mode switch located on the side of your iPhone 11 is not enabled. When the switch is in the down position, it mutes both ringer and vibration.
5. Disable “Do Not Disturb” Mode
Verify that the “Do Not Disturb” mode is not activated in the Control Center or Settings app. When enabled, it blocks incoming calls and alerts, including the ringer.
6. Restart Your iPhone
Restarting your iPhone can often resolve temporary glitches that may be preventing the ringer from working. Press and hold the Volume Up and Power buttons simultaneously until you see the Apple logo.
7. Update Your iOS Software
Outdated iOS software may introduce bugs or compatibility issues. Go to Settings > General > Software Update to ensure your iPhone is running the latest iOS version.
8. Reset Network Settings
Resetting your iPhone’s network settings can address any issues related to cellular or Wi-Fi connectivity that may be affecting the ringer functionality. Go to Settings > General > Reset > Reset Network Settings.
9. Contact Apple Support
If none of the above steps resolve the issue, contact Apple Support for further assistance. You can reach them via their website, phone, or Genius Bar appointments.
Additional Tips for Troubleshooting
10. Check App-Specific Settings
Some apps may have their own sound settings that override the system ringer volume. Check the settings within individual apps to ensure that the ringer is enabled and set to an appropriate level.
| App | Settings Location |
|---|---|
| Phone | Settings -> Phone -> Ringtones |
| Messages | Settings -> Messages -> Notifications -> Sounds |
| WhatsApp -> Settings -> Notifications -> Sounds |
11. Clean the Speaker Grilles
Dirt or debris accumulated in the speaker grilles can muffle the ringer sound. Use a soft cloth or compressed air to gently clean the grilles.
12. Unpair Bluetooth Devices
Active Bluetooth connections can interfere with the ringer functionality. Unpair any connected Bluetooth devices and test if the ringer works correctly.
How To Turn On Ringer On Iphone 11
To turn on the ringer on your iPhone 11, follow these steps:
- Make sure that your iPhone is not in silent mode. The switch on the left side of the iPhone should be in the up position.
- Open the Settings app.
- Tap on Sounds & Haptics.
- Adjust the Ringer and Alerts slider to the desired volume.
You can also use the volume buttons on the side of the iPhone to adjust the ringer volume.
People Also Ask
How do I turn on the ringer on my iPhone 11 if it’s in silent mode?
To turn on the ringer on your iPhone 11 if it’s in silent mode, follow these steps:
- Make sure that the switch on the left side of the iPhone is in the up position.
- Open the Control Center by swiping down from the top-right corner of the screen.
- Tap on the bell icon to turn on the ringer.
How do I change the ringer sound on my iPhone 11?
To change the ringer sound on your iPhone 11, follow these steps:
- Open the Settings app.
- Tap on Sounds & Haptics.
- Tap on Ringer and Alerts.
- Select the desired ringer sound.
How do I turn off the ringer on my iPhone 11?
To turn off the ringer on your iPhone 11, follow these steps:
- Make sure that the switch on the left side of the iPhone is in the down position.
- Open the Control Center by swiping down from the top-right corner of the screen.
- Tap on the bell icon with a line through it to turn off the ringer.
