In today’s fast-paced world, it’s easy to get distracted and miss important calls. Whether you’re in a meeting, at work, or simply trying to enjoy a quiet moment, a silent ringer can be a major inconvenience. If you’re an iPhone user, you may have experienced the frustration of your phone not ringing when you receive a call. Fortunately, there are a few simple steps you can take to turn on your iPhone ringer and ensure that you never miss an important call again.
The first step to turning on your iPhone ringer is to check the ringer switch. The ringer switch is located on the left side of your iPhone, above the volume buttons. When the ringer switch is turned on, you should see a small orange line. If the ringer switch is turned off, you will not hear any sound when you receive a call. To turn on the ringer switch, simply slide it to the up position.
If the ringer switch is on and you still can’t hear your iPhone ringing, there may be another issue. One possibility is that your iPhone’s volume is turned down. To check the volume, press the volume up button on the side of your iPhone. You should see a volume bar appear on the screen. If the volume bar is low, simply drag it up to increase the volume.
Locating the Ringer Switch
The ringer switch on an iPhone is a small, physical toggle switch located on the left side of the device, just above the volume buttons. It allows you to quickly and easily mute or unmute your iPhone’s ringer, without having to access any settings or menus.
To identify the ringer switch, look for a small, elongated button that has three distinct positions. The middle position is the “off” position, while the top position is the “on” position (ringer enabled), and the bottom position is the “silent” position (ringer disabled).
When the ringer switch is in the “off” position, your iPhone will not make any sound for incoming calls or notifications. When it is in the “on” position, your iPhone will play the default ringer sound for incoming calls and notifications. When it is in the “silent” position, your iPhone will still vibrate for incoming calls and notifications, but will not make any sound.
Here is a table summarizing the ringer switch positions and their corresponding functions:
| Position | Function |
|---|---|
| Middle | Ringer off |
| Top | Ringer on |
| Bottom | Silent mode (vibrate only) |
Sliding the Switch to “On”
Once you have located the ringer switch, it’s time to turn it on. The switch will be in the “off” position by default. To turn it on, simply slide the switch to the “on” position. The switch will usually be located on the left side of the iPhone, just above the volume buttons.
Here’s a step-by-step guide on how to slide the switch to “on”:
- Locate the ringer switch on the left side of the iPhone, just above the volume buttons.
- Make sure the switch is in the “off” position.
- Slide the switch to the “on” position.
You should hear a clicking sound when the switch is turned on. If you don’t hear a clicking sound, the switch may not be fully engaged. Make sure to slide the switch all the way to the “on” position.
Once the switch is turned on, your iPhone’s ringer will be enabled. You will now be able to hear incoming calls and other notifications.
| Ringer Switch Position | Ringer Status |
|—|—|
| “Off” | Ringer is disabled |
| “On” | Ringer is enabled |
Accessing the Ringer Volume Slider
Step 1: Unlock Your iPhone
To access the ringer volume slider, you must first unlock your iPhone. Use your passcode or Face ID/Touch ID to unlock the device.
Step 2: Swipe Up from the Bottom
Once your iPhone is unlocked, swipe up from the bottom of the screen to open the Control Center. This will display various controls, including the ringer volume slider.
Step 3: Locate and Adjust the Ringer Volume Slider
Locate the ringer volume slider in the Control Center. It is a vertical slider with a bell icon next to it. You can adjust the ringer volume by dragging this slider up or down.
The following table provides information about the ringer volume slider:
| Slider Position | Ringer Volume |
|---|---|
| All the way down | Silent mode (no ringer sound) |
| In the middle | Halfway volume |
| All the way up | Maximum ringer volume |
Step 4: Close the Control Center
Once you have adjusted the ringer volume, you can close the Control Center by swiping down from the top of the screen or tapping the “X” button in the top-right corner.
Adjusting the Volume Using the Physical Buttons
The physical buttons on the side of your iPhone can be used to quickly adjust the volume without having to go into the Settings app. Here’s how:
1. Locate the Volume Buttons
The volume buttons are located on the left side of your iPhone, below the sleep/wake button. There are two buttons: one for increasing the volume and one for decreasing it.
2. Press the Volume Up Button
To increase the volume, press the volume up button. You’ll see a small volume indicator appear on the screen, which will show you the current volume level.
3. Press the Volume Down Button
To decrease the volume, press the volume down button. You’ll see the volume indicator decrease on the screen as you press the button.
4. Use the Ringer Switch to Mute or Unmute
The ringer switch is a small switch located on the left side of your iPhone, above the volume buttons. When the switch is flipped up, your iPhone is in silent mode and the ringer will not sound. When the switch is flipped down, your iPhone is in ringer mode and the ringer will sound when you receive a call or notification.
| Ringer Switch Position | Ringer Volume |
|—|—|
| Up | Silenced |
| Down | Ringer sounds |
Checking the Ringer Volume in Settings
To ensure that your iPhone’s ringer is turned on and set to an appropriate level, follow these steps:
-
Tap on the "Settings" icon on your iPhone’s home screen.
-
Scroll down and tap on the "Sounds & Haptics" option.
-
Adjust the "Ringer and Alerts" volume slider to the desired level.
-
Check the "Change with Buttons" toggle to allow volume adjustments using the physical volume buttons on the side of your phone.
-
Additional Tips for Ringer Customization:
- Use a Custom Ringtone: Select a custom ringtone from the list of available options to personalize your phone’s sound.
Step Description Tap on the "Ringtone" option Choose a ringtone from the "Sounds" section Tap on "Save" to apply changes - Enable Emergency Bypass: This feature allows your phone to ring even when set to silent mode, ensuring that you can receive important calls in an emergency situation.
Step Description Tap on the "Emergency Bypass" toggle Enable "Allow Alerts in Silent Mode" - Set Separate Ringer Volume for FaceTime: Adjust the ringer volume specifically for FaceTime calls by following the steps below.
Step Description Tap on the "Sounds & Haptics" option Scroll down and tap on "FaceTime" Adjust the "Ringer Volume" slider
Troubleshooting a Silent Ringer
Check the Mute Switch
The mute switch is a small switch on the side of your iPhone. When the switch is turned on, your iPhone will be muted. To turn off the mute switch, simply flip it to the other side.
Check the Ringer Volume
The ringer volume controls the loudness of your iPhone’s ringer. To adjust the ringer volume, go to Settings > Sounds & Haptics > Ringer and Alerts. Then, use the slider to adjust the volume.
Check Bluetooth
If you have Bluetooth turned on, your iPhone may be connected to a Bluetooth device, such as a speaker or headphones. When connected to a Bluetooth device, your iPhone’s ringer will be muted. To turn off Bluetooth, go to Settings > Bluetooth and turn off the switch.
Check Focus Mode
Focus mode allows you to silence your iPhone’s ringer and notifications. To check if Focus mode is turned on, go to Settings > Focus. Then, make sure that all Focus modes are turned off.
Check Accessibility Settings
There are several accessibility settings that can affect your iPhone’s ringer. For example, the AssistiveTouch setting can disable the ringer. To check your accessibility settings, go to Settings > Accessibility. Then, make sure that all settings that could disable the ringer are turned off.
Reset All Settings
If you have tried all of the above steps and your iPhone’s ringer is still not working, you can try resetting all of your iPhone’s settings. This will reset all of your iPhone’s settings to their default values, including the ringer volume. To reset all of your iPhone’s settings, go to Settings > General > Reset > Reset All Settings.
| Troubleshooting Step | Description |
|---|---|
| Check the Mute Switch | Flip the switch on the side of your iPhone to turn off mute. |
| Check the Ringer Volume | Adjust the slider in Settings > Sounds & Haptics > Ringer and Alerts. |
| Check Bluetooth | Turn off Bluetooth in Settings > Bluetooth to disconnect from any paired devices. |
| Check Focus Mode | Disable Focus mode in Settings > Focus to ensure your ringer is not silenced. |
| Check Accessibility Settings | Review and disable any settings in Settings > Accessibility that may interfere with the ringer. |
| Reset All Settings | Reset your iPhone’s settings to default in Settings > General > Reset > Reset All Settings, but note that this will erase all customized settings. |
Disabling Silent Mode
If your iPhone is in silent mode, the ringer will be turned off. To disable silent mode, follow these steps:
- Look for the ringer switch on the side of your iPhone. It is usually located above the volume buttons.
- If the switch is in the down position, move it to the up position.
- Your iPhone is now out of silent mode and the ringer will be turned on.
| Silent Mode | Ringer |
|---|---|
| On | Off |
| Off | On |
Restoring Factory Settings
If your iPhone doesn’t ring when you receive a call, you may need to restore it to factory settings. This will erase all of your data, so be sure to back up your iPhone before you begin.
To restore your iPhone to factory settings, follow these steps:
- Connect your iPhone to your computer and open iTunes.
- Select your iPhone in the iTunes sidebar.
- Click on the "Summary" tab.
- Click on the "Restore iPhone" button.
- Click on the "Restore" button again to confirm.
- iTunes will now erase your iPhone and restore it to factory settings.
- Once the restore is complete, you will need to set up your iPhone again.
- During setup, you will be asked if you want to restore your iPhone from a backup. If you have a backup, you can select it to restore your data. Otherwise, you can choose to set up your iPhone as a new device.
Additional Tips:
- If you are unable to restore your iPhone using iTunes, you can try putting it into recovery mode and restoring it from there.
- If you are still having problems with your iPhone’s ringer, you may need to contact Apple Support.
How To Turn On iPhone Ringer
Your iPhone ringer is a convenient way to stay notified of incoming calls and messages. By default, the ringer switch is set to the “on” position. Here’s how to turn on the ringer on your iPhone:
1. Adjust the Ringer Switch
2. Verify Bluetooth Settings
3. Reset iPhone Settings
4. Disable Do Not Disturb Mode
5. Check ringer settings for Individual contacts
6. Restart iPhone
7. Update to the latest iOS version
8. Remove and reinsert your SIM card
9. Contacting Apple Support
If you’ve tried the steps above and your iPhone ringer still isn’t working, you may need to contact Apple Support.
You can contact Apple Support by phone, chat or email. Here’s how:
By phone:
| Country | Phone Number |
|---|---|
| United States | 1-800-MY-APPLE (1-800-692-7753) |
| Canada | 1-800-263-3394 |
| United Kingdom | 0800-783-0185 |
| Australia | 133-622 |
| Other countries | See the Apple Support website for a list of phone numbers in other countries. |
By chat:
Visit the Apple Support website and click on the “Contact Support” link. Then, click on the “Chat” button.
By email:
Send an email to Apple Support at [email protected]
When you contact Apple Support, be prepared to provide them with your iPhone model, iOS version, and a description of the problem you’re experiencing.
Additional Tips for Ringer Customization
1. Change the Ringer Volume
Aside from choosing a custom ringtone, you can also adjust its volume. Open the Settings app, tap Sounds & Haptics, then move the Ringer and Alerts slider to the desired level.
2. Disable Vibrate on Ring
If you find the vibration feature distracting, you can turn it off. Go to Settings > Sounds & Haptics, then toggle the Vibrate on Ring option to the off position.
3. Set a Separate Ringer for Text Messages
To distinguish between incoming calls and text messages, you can assign a different ringtone to each. Navigate to Settings > Sounds & Haptics > Text Tone and select a sound from the list.
4. Choose a Burst Pattern for Incoming Calls
For a more dynamic ring, consider using a burst pattern. This will cause your iPhone to ring in short, successive intervals. To enable it, go to Settings > Sounds & Haptics > Ringer and choose one of the burst options.
5. Add a Custom Vibration
If you prefer vibrations over ringtones, you can create a custom vibration pattern. Visit Settings > Sounds & Haptics > Vibration Patterns > Custom, then tap the New Vibration button and tap the screen to create a pattern.
6. Enable Flash for Silent Mode Ringer
When your iPhone is in silent mode, you can still be notified of calls and messages with the flashlight. Head to Settings > Accessibility > Audio/Visual and turn on the LED Flash for Alerts option.
7. Set a Ringtone for Individual Contacts
To personalize your iPhone even further, you can assign unique ringtones to different contacts. Open the Contacts app, select a contact, tap Edit, and choose Ringtone.
8. Import Ringtones
If you have a specific ringtone file, you can import it to your iPhone using a computer. Connect your iPhone to a computer, open iTunes or Finder, and drag and drop the ringtone file into the Tones section.
9. Use Third-Party Apps for Custom Ringtones
There are numerous third-party apps available in the App Store that offer a wide selection of custom ringtones. These apps often feature user-generated content, providing you with countless options to choose from.
10. Create Custom Ringtones
With a little effort, you can create your own custom ringtones using GarageBand or other audio editing software. Start by recording or importing an audio file, then trim and edit it to your liking. Finally, export the file as an M4R ringtone.
How To Turn On iPhone Ringer
If your iPhone is on silent mode, you may not hear your ringer when someone calls. To turn on the ringer, follow these steps:
- Look at the side of your iPhone. You should see a switch.
- Slide the switch up to turn on the ringer.
You can also turn on the ringer in the Settings app:
- Open the Settings app.
- Tap on Sounds & Haptics.
- Drag the Ringer and Alerts slider to the right.
People Also Ask About How To Turn On iPhone Ringer
How do I turn on the ringer on my iPhone if it’s on silent mode?
To turn on the ringer on your iPhone if it’s on silent mode, you can slide the switch on the side of your iPhone up or open the Settings app and tap on Sounds & Haptics. Then, drag the Ringer and Alerts slider to the right.
Why is my iPhone ringer not working?
If your iPhone ringer is not working, it could be because your iPhone is on silent mode, the ringer volume is too low, or there is a problem with the speaker. To troubleshoot the issue, try turning off silent mode, increasing the ringer volume, or restarting your iPhone.
How do I change the ringer on my iPhone?
To change the ringer on your iPhone, open the Settings app and tap on Sounds & Haptics. Then, tap on Ringtone and select a new ringtone from the list. You can also download new ringtones from the iTunes Store.
