Tying shoes can be a hassle, especially when you’re in a hurry. But there’s a way to tie your shoes so that you can slip them on and off without having to tie them every time. It’s called the “loop and over” method, and it’s surprisingly easy to do. Once you’ve mastered the loop and over method, you’ll never have to worry about tying your shoes again.
To tie your shoes using the loop and over method, start by making two small loops with the laces. Then, cross the left loop over the right loop and pull it through the hole. Next, take the right loop and cross it over the left loop and pull it through the hole. You should now have two loops on one side of the shoe and two loops on the other side. Take the left loop on one side and cross it over the right loop on the other side. Then, pull it through the hole. Repeat this step with the right loop. You should now have two loops on one side of the shoe and one loop on the other side. Take the left loop and cross it over the right loop. Then, pull it through the hole. You should now have one loop on each side of the shoe. Tighten the loops and tuck them under the tongue of the shoe.
That’s it! You’ve now tied your shoes using the loop and over method. To slip them on, simply pull on the loops. To take them off, simply push down on the loops. It’s that easy! The loop and over method is a great way to tie your shoes if you want to be able to slip them on and off without having to tie them every time. It’s also a good method for kids who are learning to tie their shoes. So next time you’re in a hurry, give the loop and over method a try.
The Ankle-Wrap-n-Tuck Technique
This method is perfect for those who want a secure and comfortable fit that will keep their shoes from slipping off. Here’s how to do it:
- Cross the laces: Start by crossing the laces over each other, as you would when tying a regular bow.
- Wrap around the ankle: Take the left lace and wrap it around the back of your left ankle, then cross it over the right lace.
- Bring the lace over the shoe: Bring the left lace over the top of your shoe and tuck it under the right lace.
- Pull tight: Pull both laces tight to secure the knot.
- Repeat on the other side: Repeat the same steps on the other side of your shoe.
- Double-knot: For extra security, double-knot the laces.
Here’s a table summarizing the steps:
| Step | Action |
|---|---|
| 1 | Cross the laces |
| 2 | Wrap around the ankle |
| 3 | Bring the lace over the shoe |
| 4 | Pull tight |
| 5 | Repeat on the other side |
| 6 | Double-knot |
The Speed Lace Method
The speed lace method is a quick and easy way to tie your shoes so that they slip on and off easily. This method is especially useful for people who have difficulty tying their shoes or who want to be able to slip their shoes on and off quickly and easily.
To tie your shoes using the speed lace method, follow these steps:
1.
- Lace your shoes as you normally would, but do not tie the laces together.
- Take the end of one lace and thread it through the top of the other lace.
- Pull the lace through until it is tight.
- Repeat steps 2 and 3 with the other lace.
- Now you should have two loops of lace, one on each side of your shoe.
- Take one loop of lace and put it over the other loop.
- Pull the loop through the hole in the top of your shoe.
- Repeat steps 6 and 7 with the other loop of lace.
- Now you should have a loop of lace on each side of your tongue of your shoe.
- Tie the two loops of laces together.
Your shoes are now tied and ready to slip on and off easily.
Tips:
*
To make your shoes even easier to slip on and off, you can use a lace lock. A lace lock is a small device that holds the two loops of laces together. This prevents the laces from coming untied and makes it even easier to slip your shoes on and off.
*
If you find that your shoes are too tight or too loose, you can adjust the tightness of the laces by pulling on the loops of laces. To tighten the laces, pull on the loops of laces towards the outside of your shoe. To loosen the laces, pull on the loops of laces towards the inside of your shoe.
*
The speed lace method can be used on any type of shoe with laces.
The Lace-Around-the-Sole Loop
For this method, you’ll need a pair of shoes with laces and a flat surface to work on. Laces should be equal in length on both sides.
Step 1: Make a Loop at the End of Each Lace
Start by tying a simple overhand knot at the end of each lace. This will create a small loop at the end of each lace, which you’ll use to secure the laces around the sole of the shoe.
Step 2: Wrap the Laces Around the Sole
Take one of the laces and wrap it around the sole of the shoe, starting from the outside. Bring the lace up through the small hole on the opposite side of the shoe, and then wrap it around the sole again, this time going in the opposite direction. Repeat this process with the other lace.
Step 3: Secure the Laces
- Once you’ve wrapped the laces around the sole, take the lace from the outside of one shoe and cross it over the lace from the inside of the other shoe.
- Bring the crossed lace up through the small hole on the opposite side of the shoe, and then wrap it around the sole again, this time going in the opposite direction.
- Repeat this process with the other lace, and then tighten the laces to secure them.
| Step | Description |
|---|---|
| 1 | Make a loop at the end of each lace |
| 2 | Wrap the laces around the sole |
| 3 | Secure the laces |
The Double-Wrap Slide
This method is suitable for shoes that have a snug fit and don’t require extensive lacing. Here are the steps:
-
1. Lace Normally
Start by lacing the shoes as you would normally, creating a series of crossed loops.
-
2. Create a Single Loop
Take the left end of the lace and pass it under and over the right end to create a single loop on the left side of the shoe.
-
3. Double-Wrap the Loop
Next, take the left end of the lace and wrap it around the loop twice, creating two loops that are stacked on top of each other.
-
4. Tighten and Slip On
Pull on both ends of the lace to tighten the loops. This will create a secure fit that allows you to easily slip on and off the shoes without untying them. The double-wrap provides extra friction and prevents the loops from slipping open.
Advantages Disadvantages – Quick and easy to do
– Ideal for snug-fitting shoes
– No need to untie the shoes to put them on or off
– Comfortable and secure fit– Not suitable for all types of shoes
– May not provide enough support for high-impact activities
The Cross-Lacing Slip-On
The cross-lacing slip-on is a tying method that keeps your shoes snugly in place without the hassle of tying and untying knots. Here’s a step-by-step guide:
- Start by lacing your shoes as you normally would, crossing the laces over each other at the top of the tongue.
- Pull the laces tight and bring them together over the cross-over point.
- Form a loop with one of the laces.
- Pass the other lace through the loop and pull it tight.
- Tucking the Excess Laces:
Tucking the Excess Laces
Once you’ve finished cross-lacing, you’ll have excess lace that needs to be tucked away to prevent tripping:
| Step | Instructions |
|---|---|
| 1 | Create a small loop with both laces. |
| 2 | Push the loop underneath the tongue of the shoe. |
| 3 | Pull the laces tight until the excess is hidden. |
This method allows you to slip on your shoes easily while ensuring a secure fit.
The Knotless Slip-On
Lace the shoe as usual, but instead of tying a knot, feed the ends of the laces through the two loops, one on each side of the tongue.
Step 6: Tightening the Knotless Slip-On
-
Method 1: Tighten by Hand: Pull on both ends of the laces simultaneously to tighten the knotless loop. Once the desired tightness is achieved, trim the excess lace.
-
Method 2: Use a Lace Tightener: Insert a lace tightener (a small, plastic tool) into the loop. Use the tightening lever on the tool to pull the laces in opposite directions and secure the loop. Trim the excess lace.
-
Method 3: Use a Zip Tie: Thread a zip tie through the loop. Tighten the zip tie and trim the excess. This method provides a more permanent tightening solution, making it suitable for shoes that will be worn for extended periods.
| Method | Instructions |
|---|---|
| Tighten by Hand | Pull on both ends of the laces simultaneously to tighten the knotless loop. Trim excess lace. |
| Use a Lace Tightener | Insert a lace tightener into the loop. Use the tightening lever to pull laces in opposite directions. Trim excess lace. |
| Use a Zip Tie | Thread a zip tie through the loop. Tighten and trim excess. Provides more permanent solution. |
The Loop-and-Tuck Slip-On
The loop-and-tuck slip-on is an easy and secure way to tie your shoes so that they can be slipped on and off without having to untie them. This method is especially popular with children and people with disabilities who have difficulty tying traditional laces.
Step 1: Cross the Right Lace Over the Left
Take the right lace and cross it over the left lace, forming an “X”.
Step 2: Loop the Right Lace Behind the Left
Bring the right lace behind the left lace and form a loop.
Step 3: Pull the Right Lace Through the Loop
Pull the right lace through the loop to tighten the first knot.
Step 4: Create a Second Loop with the Right Lace
Form a second loop with the right lace, this time bringing it over the left lace and behind the first loop.
Step 5: Pull the Right Lace Through the Second Loop
Pull the right lace through the second loop to tighten the second knot.
Step 6: Tuck the Right Lace Under the First Loop
Take the right lace and tuck it under the first loop, forming a small loop.
Step 7: Pull the Right Lace Tight and Tuck It into the Small Loop
Pull the right lace tight and tuck it into the small loop to create a secure slip-on knot. Repeat steps 1-7 with the left lace to create a symmetrical loop-and-tuck slip-on.
Tips:
- Use a double knot for extra security.
- Make sure the laces are not too loose or too tight.
- Practice tying the loop-and-tuck slip-on until you can do it quickly and easily.
The Elastic Loop Method
Step 1: Lace the shoes
Lace up the shoes as you normally would, but stop before tying the laces together.
Step 2: Create the elastic loop
Cut a piece of elastic cord that is about 12 inches long. Thread the cord through one of the top lace holes on the shoe, starting from the inside.
Step 3: Form a loop
Bring the ends of the cord together and form a loop, leaving about an inch of cord at the top.
Step 4: Secure the loop
Thread the ends of the cord back through the same lace hole they came from, forming a secure loop.
Step 5: Adjust the loop
Tighten the loop until it is snug, but not too tight, so that the shoe can still be easily slipped on and off.
Step 6: Tie the shoes
Tie the laces together as you would normally do, but leave a small loop at the top.
Step 7: Tuck in the laces
Tuck the laces into the elastic loop to keep them out of the way.
Step 8: Secure the elastic loop
To prevent the elastic loop from slipping off, you can use a small safety pin or a dab of hot glue to secure it to the inside of the shoe.
Step 9: Slip on the shoes!
Your shoes are now ready to be slipped on and off with ease! Simply pull on the elastic loop to tighten the laces, and slip the shoes off by pulling on the laces.
| Pros: | Cons: |
|
|
The Quick-Release Slip-On
The quick-release slip-on is a variation of the standard slip-on knot that allows you to easily remove your shoes without having to untie them completely.
To tie a quick-release slip-on:
1. Start by making a traditional slip-on knot (see steps 1-6 above).
2. When you get to step 7, instead of pulling the right loop all the way through, stop when there is about 2 inches of loop remaining.
3. Take the left loop and thread it through the small loop you created in step 2.
4. Pull the left loop tight to create a small knot.
5. Repeat steps 2-4 with the right loop.
6. You should now have two small knots next to each other.
7. Pull the ends of the laces to tighten the knot and secure your shoes.
8. To remove your shoes, simply pull on the ends of the laces and the quick-release knot will come undone.
The quick-release slip-on is a great option for people who need to be able to remove their shoes quickly and easily, such as athletes, musicians, or security personnel. It is also a good choice for children who are learning to tie their shoes, as it is relatively easy to master.
Tips:
- To make the quick-release slip-on even easier to remove, you can use a pair of scissors to cut the ends of the laces shorter.
- You can also use a different type of knot, such as a surgeon’s knot or a bowline knot, to create a quick-release slip-on.
- If you are having trouble tying a quick-release slip-on, there are many helpful videos available online.
The “Cheater’s” Slip-On
This method is perfect for those who want the convenience of slip-on shoes without sacrificing the security of laces. It’s a simple and effective way to keep your shoes on, even when you’re being active.
Step 1: Lace up your shoes as usual.
Step 2: Cross the laces at the top of your foot.
Step 3: Pull the left lace over the right lace and back under.
Step 4: Pull the right lace over the left lace and back under.
Step 5: Repeat steps 3-4, creating a criss-cross pattern down the length of your foot.
Step 6: When you reach the bottom of your foot, tie the laces as usual.
Step 7: Now, here’s the “cheater’s” part:
Step 8: Take the end of the left lace and thread it through the loop on the right side of your shoe.
Step 9: Pull the left lace tight to create a snug fit.
Step 10: Repeat step 8-9 on the other side of your shoe.
And voila! You now have shoes that are easy to slip on and off, but still stay securely on your feet. This method is especially helpful for people with wide feet or high insteps who find it difficult to find comfortable and secure shoes. The criss-cross pattern helps to distribute the pressure of the laces, making them more comfortable to wear for long periods of time.
How To Tie Shoes To Slip On
Tying your shoes to slip on is a great way to make getting ready in the morning a little bit easier. It’s also a good way to keep your shoes from coming untied while you’re walking or running.
To tie your shoes to slip on, follow these steps:
1.
Start by crossing the laces over each other, as if you were going to tie them normally.
2.
Take the right lace and pass it over the left lace, then under the right lace.
3.
Take the left lace and pass it over the right lace, then under the left lace.
4.
Pull both laces tight. You should now have a small loop in the center of your laces.
5.
Take the right lace and pass it through the loop from the bottom.
6.
Take the left lace and pass it through the loop from the top.
7.
Pull both laces tight. You should now have a secure knot that will keep your shoes from coming untied.
People Also Ask About How To Tie Shoes To Slip On
How do you tie shoes so they don’t come untied?
To tie shoes so they don’t come untied, follow these steps:
-
Start by crossing the laces over each other, as if you were going to tie them normally.
-
Take the right lace and pass it over the left lace, then under the right lace.
-
Take the left lace and pass it over the right lace, then under the left lace.
-
Pull both laces tight. You should now have a small loop in the center of your laces.
-
Take the right lace and pass it through the loop from the bottom.
-
Take the left lace and pass it through the loop from the top.
-
Pull both laces tight. You should now have a secure knot that will keep your shoes from coming untied.
-
Start by crossing the laces over each other, as if you were going to tie them normally.
-
Take the right lace and pass it over the left lace, then under the right lace.
-
Take the left lace and pass it over the right lace, then under the left lace.
-
Pull both laces tight. You should now have a small loop in the center of your laces.
-
Take the right lace and pass it through the loop from the bottom.
-
Take the left lace and pass it through the loop from the top.
-
Pull both laces tight. You should now have a secure knot that will keep your shoes from coming untied.
