If you’re like most women, you’ve probably experimented with different hairstyles at some point in your life. Whether it’s been a funky pixie cut, long flowing locks, or something in between, there’s no denying that a new ‘do can give you a much-needed confidence boost. However, if you’re not ready to commit to a permanent change, a quick weave is a great way to temporarily switch up your look. Quick weaves are a versatile and affordable option that can be installed in a matter of hours, and they can last for several weeks with proper care. If you’re considering getting a quick weave, it’s important to know how to take it out properly to avoid damaging your natural hair.
Unlike traditional sew-in weaves, quick weaves do not require any braiding or bonding of tracks to your natural hair. Instead, they are attached using a special type of glue that is applied to the weft of the weave. This makes them much easier to install and remove, which is why they are often a good choice for women who are new to weaves. However, it’s important to note that quick weaves can be more damaging to your natural hair than traditional sew-ins, so it’s important to follow the removal instructions carefully.
To remove a quick weave, you will need to purchase a special glue remover. You can find this product at most beauty supply stores. Once you have the glue remover, you can begin the removal process. First, apply the glue remover to the weft of the weave, being careful not to get any on your natural hair. Allow the glue remover to sit for a few minutes, then gently begin to pull the weave away from your head. If you are having difficulty removing the weave, you can use a pair of pliers to help you. Once the weave is removed, wash your hair thoroughly with a clarifying shampoo to remove any remaining glue residue.
Gather Your Tools
Before embarking on the quick weave removal process, it is crucial to assemble the necessary tools. These tools will facilitate a smooth and efficient removal, minimizing potential damage to your natural hair.
Essential Tools for Quick Weave Removal
| Tool | Purpose |
|---|---|
| Wide-tooth Comb | Gently detangle and loosen the weave |
| Rattail Comb | Precisely cut and remove the weft tracks |
| Scissors | Carefully snip the tracks without damaging your hair |
| Detangling Spray or Conditioner | Lubricate the hair and prevent breakage |
| Cap | Protect your hair and furniture from loose hair |
| Brush | Gently comb and style your natural hair after removal |
| Optional: Comb Rubbing Alcohol | Sterilize combs and scissors to maintain hygiene |
Prepare Your Hair
Before removing your quick weave, it’s crucial to prepare your natural hair to minimize damage and ensure a smooth transition. Follow these steps to properly prep your hair:
Detangle and Remove Excess Glue/Residue
- Use a wide-toothed comb or detangling brush to gently remove any knots or tangles from your hair.
- If there’s any excess glue or adhesive residue on your hair, apply a small amount of adhesive remover or rubbing alcohol to a cotton ball and gently rub it over the affected areas to dissolve and remove the residue.
Moisturize and Condition
- Apply a deep conditioner or moisturizing hair mask to your hair to replenish moisture and restore its natural elasticity.
- Leave the conditioner in for the recommended amount of time, then rinse thoroughly to remove any excess product.
Protect Your Hairline
- Apply petroleum jelly or a thick moisturizer to your hairline and the temples to protect it from any friction or irritation during the removal process.
Section Your Hair
Before you start removing your quick weave, it’s important to section your hair to make the process easier and avoid tangles. Here’s a detailed guide to sectioning your hair:
Creating the Four Main Sections
| Section | Description |
|---|---|
| Top Section | From the crown of your head to the middle of your forehead |
| Bottom Section | From the nape of your neck to the top of your ears |
| Left Side Section | From the middle of your forehead to the nape of your neck, including the left ear |
| Right Side Section | From the middle of your forehead to the nape of your neck, including the right ear |
1. Dampen your hair with water or a detangling spray to make it easier to work with.
2. Use a wide-toothed comb or your fingers to gently remove any knots or tangles.
3. Starting at the crown of your head, use a rattail comb or the pointed end of a tail comb to create a horizontal part, dividing your hair into two equal halves from the front of your hairline to the nape of your neck. This is your top section.
4. Use the same technique to create a horizontal part at the top of your ears, dividing your hair into two equal halves from the sides of your hairline to the back of your neck. This creates your bottom section.
5. Secure each section with a hair clip or elastic band to keep it out of the way while you work on the other sections.
Soak the Weave
Before removing a quick weave, it’s crucial to soften it up to facilitate easier removal. Begin by wetting the weave with lukewarm water using a spray bottle or a damp towel.
After wetting the weave, apply a generous amount of a hair conditioner or detangling spray. Gently massage the conditioner into the hair, working from roots to tips, to loosen the adhesive bond.
Allow the conditioner to sit on the weave for 15-30 minutes, depending on the strength of the adhesive used. This soaking period allows the conditioner to penetrate the hair and break down the adhesive, making it easier to remove.
Tips for Soaking the Weave
| Tips |
|---|
| Use a conditioner specifically designed for wigs and weaves. |
| Add a few drops of tea tree oil to the conditioner for its antibacterial and anti-inflammatory properties. |
| Wrap a warm towel around the weave after applying the conditioner to enhance the softening process. |
Loosen the Weave
The first step is to loosen the weave. You can do this by using a comb or your fingers. Start at the nape of your neck and work your way down to the ends. Be gentle and avoid tugging on your hair.
Once the weave is loose, you can start to remove it. To do this, gently pull on the weft (the strip of hair that is sewn into your own hair). Start at the bottom of the weft and work your way up to the top. Be careful not to pull too hard, or you could damage your own hair.
If you are having trouble removing the weave, you can use a pair of scissors to cut the weft. Be careful not to cut your own hair. Once the weft is cut, you should be able to easily remove the weave.
Here are some tips for loosening the weave:
- Use a wide-toothed comb to gently loosen the weave. Be careful not to tug on your hair.
- If you are having trouble loosening the weave with a comb, you can use your fingers. Gently massage your scalp to loosen the weave.
- If you are having trouble removing the weave, you can use a pair of scissors to cut the weft. Be careful not to cut your own hair.
- Once the weave is loose, you can start to remove it. Gently pull on the weft and work your way up to the top.
- Be careful not to pull too hard, or you could damage your own hair.
Remove the Weave
The process of removing a quick weave is relatively straightforward and can be done at home with a few simple tools. Here are the steps you need to follow:
- Gather your supplies. You will need a wide-toothed comb, a pair of scissors, a bowl of warm water, and a mild shampoo.
- Prepare your hair. Wet your hair and detangle it with a wide-toothed comb.
- Remove the weft tracks. Use your fingers to gently separate the weft tracks from your hair. If you are having difficulty, you can use a pair of scissors to cut the tracks into smaller pieces.
- Remove the glue or adhesive. Dip a cotton ball in the warm water and rub it over the glue or adhesive to loosen it. You can also use a mild shampoo to help remove the glue.
- Wash your hair. Once you have removed all of the weave, wash your hair with a mild shampoo to remove any remaining glue or adhesive.
- Condition your hair. After you have washed your hair, condition it to help restore its moisture and shine.
Additional Tips
Here are a few additional tips to help you remove your quick weave safely and easily:
- Be gentle with your hair. Avoid pulling or tugging at your hair when removing the weave, as this can damage your hair.
- Use warm water. Warm water will help to loosen the glue or adhesive and make it easier to remove.
- Use a mild shampoo. A mild shampoo will help to remove the glue or adhesive without damaging your hair.
- Condition your hair after washing. Conditioning your hair will help to restore its moisture and shine.
Cleanse and Condition Your Hair
After removing your quick weave, it’s important to thoroughly cleanse and condition your natural hair to remove any product buildup, dirt, or oils that may have accumulated during the time it was covered.
Step 1: Shampoo and Rinse
Begin by shampooing your hair with a clarifying shampoo. This type of shampoo is designed to remove buildup and dirt without stripping your hair of its natural oils. Massage the shampoo gently into your scalp and hair, working from roots to tips. Rinse thoroughly with warm water.
Step 2: Deep Condition
After shampooing, apply a deep conditioner to your hair. Deep conditioners are designed to penetrate the hair shaft and provide intense moisture and nourishment. Cover your hair with a plastic cap and leave the deep conditioner in for the amount of time specified on the bottle, usually 15-30 minutes. Rinse thoroughly with warm water.
Step 3: Moisturize and Style
Once your hair is cleansed and conditioned, apply a leave-in conditioner or moisturizer to help seal in moisture and protect your hair. Style your hair as desired.
Apply Leave-In Conditioner
Leave-in conditioner is a water-based moisturizer that provides intense hydration and nourishment to the hair. It helps to detangle, hydrate, and protect the hair while reducing breakage and frizz. When removing a quick weave, it’s essential to apply leave-in conditioner to prepare the hair for the detangling process.
Benefits of Leave-In Conditioner
| Benefits | Description |
|---|---|
| Hydrates Hair | Restores moisture levels, preventing dryness and breakage. |
| Detangles Knots | Lubricates hair strands, making it easier to remove tangles without causing damage. |
| Protects Hair | Forms a protective barrier on the hair shaft, shielding it from environmental damage and potential breakage during the removal process. |
| Reduces Frizz | Smooths and aligns hair cuticles, reducing frizz and improving hair texture. |
| Strengthens Hair | Contains proteins and nutrients that help repair and strengthen hair fibers, improving hair health and preventing future breakage. |
| Moisturizing and Conditioning Products | Benefits |
|---|---|
| Clarifying shampoo | Removes product buildup and dirt from hair and scalp |
| Deep conditioner | Nourishes and hydrates hair |
| Leave-in conditioner | Keeps hair hydrated and detangled |
Aftercare Tips
1. Wash regularly: Wash your scalp and hair with a gentle shampoo and conditioner every 2-3 days to remove any buildup of sweat, dirt, or products.
2. Moisturize: Keep your hair and scalp moisturized with a leave-in conditioner or hair oil. This will help to prevent dryness, itching, and breakage.
3. Avoid heat styling: Heat styling can damage your natural hair, so it’s best to avoid using heat tools like blow dryers or flat irons.
4. Detangle gently: Use a wide-toothed comb or detangling brush to gently detangle your hair. Avoid brushing too forcefully, as this can cause damage.
5. Protect your hair at night: Sleep with a satin pillowcase or wrap your hair in a satin scarf to prevent friction and breakage.
6. Avoid wearing your hair up in tight styles: Tight hairstyles can put tension on your hair and damage it.
7. Get regular trims: Regular trims will help to remove split ends and keep your hair healthy.
8. Eat a healthy diet: A healthy diet that includes plenty of fruits, vegetables, and whole grains will help to nourish your hair from the inside out.
9. Drink plenty of water: Staying hydrated will help to keep your hair hydrated and healthy.
10. Be patient: It takes time for your hair to recover from the effects of a quick weave. Follow these aftercare tips diligently and you will gradually see improvement in the health and appearance of your hair.
| Day | Task |
|---|---|
| 1-2 | Wash your hair with a gentle shampoo and conditioner. |
| 2-3 | Moisturize your hair with a leave-in conditioner or hair oil. |
| 3-4 | Detangle your hair gently with a wide-toothed comb or detangling brush. |
| 4-5 | Protect your hair at night with a satin pillowcase or wrap. |
| 5-6 | Avoid wearing your hair up in tight styles. |
| 6-7 | Get a regular trim to remove split ends. |
| 7+ | Continue to follow all of the aftercare tips above until your hair has recovered. |
How To Take A Quick Weave Out
Taking out a quick weave can be a daunting task, but it doesn’t have to be. With the right tools and a little patience, you can remove your weave in no time. Here’s a step-by-step guide on how to take out a quick weave:
Materials:
- Wide-tooth comb
- Scissors
- Olive oil or coconut oil
Instructions:
-
Start by detangling your hair. Use a wide-tooth comb to gently remove any tangles from your hair. This will make it easier to remove the weave later on.
-
Cut the tracks. Once your hair is detangled, use scissors to cut the tracks of the weave close to your scalp. Be careful not to cut your own hair.
-
Use the hot water. Fill up a bowl with hot water and add in a few drops of olive oil or coconut oil. Soak your weave in the hot water for 10-15 minutes. This will help to loosen the glue that is holding the weave in place.
-
Remove the weave. Once the weave is loose, gently pull it away from your scalp. Start at the back of your head and work your way forward. Be patient and don’t pull too hard or you could damage your own hair.
-
Wash and condition your hair. Once the weave is removed, wash and condition your hair as usual. This will help to remove any leftover glue or hair products.
People Also Ask About How To Take A Quick Weave Out
Can I take out a quick weave myself?
Yes, you can take out a quick weave yourself, but it is important to be patient and gentle. If you pull too hard on the weave, you could damage your own hair. It is also important to use the right tools and materials. A wide-tooth comb, scissors, and olive oil or coconut oil are all essential for removing a quick weave.
How long does it take to take out a quick weave?
The time it takes to take out a quick weave will vary depending on the length and thickness of your hair, as well as the type of glue that was used to install the weave. In general, it will take anywhere from 30 minutes to 2 hours to remove a quick weave.
Does taking out a quick weave damage my hair?
Taking out a quick weave can damage your hair if it is not done properly. If you pull too hard on the weave, you could break your own hair. It is also important to use the right tools and materials. A wide-tooth comb, scissors, and olive oil or coconut oil are all essential for removing a quick weave without damaging your hair.
