It’s time to hit the streets and roll with style, and the first step is to assemble your trusty skateboard. The wheels are your chariot’s connection to the pavement, providing the freedom and momentum to conquer every bump and carve. However, mounting these essential components can be a daunting task for newcomers. Fear not, fellow shredders! This comprehensive guide will break down the process into manageable steps, ensuring that your board is ready for action in no time. Grip it and flip it, let’s dive into the intricacies of wheel assembly and unlock the thrilling world of skateboarding.
Before embarking on this wheel-attaching adventure, gather the necessary tools. You’ll need a skateboard tool, typically shaped like a “T,” which combines a 9/16″ socket for the axle nuts, a 1/2″ socket for the kingpin nut, and a Phillips head screwdriver. Additionally, a pair of pliers or a wheel removal tool may come in handy for stubborn wheels or bearings. With your toolbox at the ready, let’s commence the wheel assembly process.
Start by flipping your deck upside down, revealing the underside with its intricate web of trucks and mounting hardware. Locate the four empty axle holes, two on each side of the deck. Each axle is composed of a metal shaft with a bearing pressed onto each end. Insert the axles into the holes, ensuring that the bearings are facing inwards towards the center of the deck. Now, take a wheel and position it onto the axle, sliding it over the bearing until it fits snugly against the truck. Repeat this process for the remaining three wheels.
How To Put Wheels On A Skateboard
Installing wheels on a skateboard is a relatively simple process that can be completed in a few minutes with the right tools. Here are the steps on how to do it:
- Gather your materials. You will need a new set of wheels, a skateboard tool, and a skate key.
- Place the skateboard on its side. This will give you easy access to the wheels.
- Loosen the axle nuts. Use the skateboard tool to loosen the axle nuts on the truck that you want to replace the wheels on.
- Remove the old wheels. Grip the old wheel and pull it straight off the axle.
- Place the new wheels on the axle. Make sure that the wheels are facing the correct direction.
- Tighten the axle nuts. Use the skateboard tool to tighten the axle nuts until they are snug.
- Repeat the process for the other wheels. Once you have replaced the wheels on one truck, repeat the process for the other truck.
Once you have installed the new wheels, your skateboard is ready to ride.
