Welcome to the ultimate guide to mastering the Bissell Proheat Carpet Cleaner. Whether you’re a seasoned cleaning pro or a novice tackling stains, this comprehensive guide will empower you to restore your carpets to their pristine glory. This versatile machine combines powerful suction with ingenious cleaning solutions to eliminate dirt, allergens, and unsightly stains, leaving your floors refreshed and revitalized.
Before embarking on your carpet cleaning adventure, it’s essential to establish a solid understanding of the Bissell Proheat’s components and operation. Familiarize yourself with the machine’s controls, including the power switch, spray trigger, and tank release buttons. Understanding the functions of each component will ensure efficient and effective cleaning.
Once you’ve mastered the basics, let’s dive into the practical aspects of operating the Bissell Proheat. The machine’s cleaning process is straightforward: Fill the clean water tank with a mixture of water and Bissell’s cleaning solution, attach the cleaning head to the machine, and power it on. As you glide the cleaning head over your carpets, the machine will dispense the cleaning solution, agitate dirt and stains, and extract the loosened debris into the dirty water tank. Remember to empty the dirty water tank periodically to prevent overflow and maintain optimal cleaning performance.
Assembling the Bissell ProHeat Carpet Cleaner
Before using your Bissell ProHeat Carpet Cleaner, it is important to assemble it properly. Here are the steps involved:
- Attach the handle to the base. Align the handle with the base and push it down until it clicks into place.
- Attach the water tank to the base. Open the lid on the water tank and fill it with clean water. Then, insert the water tank into the base and close the lid.
- Attach the cleaning solution tank to the base. Open the lid on the cleaning solution tank and fill it with the desired amount of Bissell cleaning solution. Then, insert the cleaning solution tank into the base and close the lid.
- Attach the power cord to the base. Plug the power cord into an electrical outlet.
- Attach the cleaning head to the base. Align the cleaning head with the base and push it down until it clicks into place.
Once you have assembled the Bissell ProHeat Carpet Cleaner, you are ready to begin cleaning your carpets.
Additional tips for assembling the Bissell ProHeat Carpet Cleaner:
| Tip | Description |
|---|---|
| Make sure that all of the parts are properly aligned before clicking them into place. | This will help to prevent leaks and other problems. |
| Do not overfill the water tank or the cleaning solution tank. | Overfilling can cause leaks and damage to the machine. |
| Use the correct amount of cleaning solution. | Using too much cleaning solution can leave a residue on your carpets. |
Filling the Solution Tank
The solution tank holds the cleaning solution that is dispensed during the carpet cleaning process. To fill the solution tank, follow these steps:
- Open the solution tank cap by pulling it towards you.
- Pour the desired amount of cleaning solution into the tank. The tank holds up to 1 gallon of solution.
- Close the solution tank cap by pushing it down until it clicks into place.
Choosing the Right Cleaning Solution
Bissell offers a variety of cleaning solutions designed for different carpet types and cleaning needs. When selecting a cleaning solution, consider the following factors:
| Carpet Type | Cleaning Solution |
|---|---|
| Nylon | Bissell ProHeat 2X Advanced Carpet Cleaning Formula |
| Polyester | Bissell ProHeat 2X Advanced Deep Cleaning Formula |
| Wool | Bissell ProHeat 2X Wool & Delicate Fiber Formula |
Choosing the Correct Cleaning Mode
The Bissell ProHeat Carpet Cleaner offers several cleaning modes to suit different carpet types and cleaning needs. Here’s a breakdown of the available modes:
Express Clean Mode
This mode is ideal for quick touch-ups or light cleaning. It uses a reduced amount of water and detergent, resulting in a shorter drying time.
Deep Clean Mode
This mode is designed for heavy-duty cleaning and deep stain removal. It applies more water and detergent to the carpet, allowing it to penetrate deep into the fibers and remove embedded dirt and grime.
Rinse Mode
This mode should be used after Deep Clean mode to rinse away any remaining detergent residue. It uses only water to remove the cleaning solution and prevent the carpet from feeling sticky.
| Cleaning Mode | Description |
|---|---|
| Express Clean | Quick touch-ups and light cleaning |
| Deep Clean | Heavy-duty cleaning and deep stain removal |
| Rinse | Removes remaining detergent residue after Deep Clean |
Pre-Treating Stains
Before using the Bissell Proheat carpet cleaner, it’s important to pre-treat any stains or heavily soiled areas. This will help the cleaner to more effectively remove the dirt and grime, leaving your carpets looking and smelling like new.
To pre-treat stains, you will need:
- A clean white cloth or sponge
- A mild detergent or stain remover
- A bowl of warm water
To pre-treat a stain, follow these steps:
- Blot up as much of the stain as possible with a clean white cloth or sponge.
- Apply a small amount of mild detergent or stain remover to the stain.
- Gently rub the stain with a clean white cloth or sponge until it is removed.
- Rinse the area with a clean white cloth or sponge dipped in warm water.
- Blot the area dry with a clean white cloth or sponge.
| Stain Type | Pre-Treatment Solution |
|---|---|
| Coffee | White vinegar |
| Red wine | Club soda or hydrogen peroxide |
| Pet urine | Enzymatic cleaner |
| Chewing gum | Ice |
| Blood | Hydrogen peroxide |
Once you have pre-treated all of the stains, you can begin using the Bissell Proheat carpet cleaner.
Cleaning the Carpet Using the Bissell ProHeat
Before you begin cleaning your carpet with the Bissell ProHeat, it’s essential to prepare the area. Remove all furniture and other obstacles from the room, and vacuum the carpet thoroughly to remove loose dirt and debris.
Filling the Clean Water Tank
Locate the clean water tank on the back of the machine. Remove the tank by lifting it upward, and fill it with warm water. Add the recommended amount of Bissell ProHeat cleaning solution to the tank, according to the manufacturer’s instructions.
Attaching the Cleaning Brush
Attach the cleaning brush to the vacuum hose by aligning the brush’s tab with the corresponding slot on the hose. Push the brush onto the hose until it clicks into place.
Priming the Machine
Before using the machine, it’s crucial to prime it to remove any air from the system. Place a clean white cloth over the end of the cleaning brush. Fill the clean water tank with water and turn the machine on. Allow it to run for approximately 15-20 seconds until water starts flowing through the brush. Turn off the machine and remove the white cloth.
Cleaning the Carpet
To clean the carpet, simply push the machine forward while depressing the trigger on the handle. The machine will dispense cleaning solution and water onto the carpet, and the rotating brush will agitate the fibers to remove dirt and stains. Overlap your cleaning strokes to avoid missing any areas.
Rinsing and Drying the Carpet
Rinsing the Carpet
After cleaning, rinse the carpet thoroughly with clean water. This will remove any remaining cleaning solution and dirt.
- Fill the clean water tank with hot tap water.
- Attach the carpet cleaning hose to the machine.
- Hold the cleaning head over the carpet and press the "Rinse" button.
- Move the cleaning head back and forth over the carpet, rinsing until the water runs clear.
Drying the Carpet
After rinsing, dry the carpet as much as possible to prevent mold and mildew.
- Open windows and doors to air out the room.
- Turn on fans to circulate air and speed up drying.
- Place dehumidifiers in the room to absorb moisture.
- Place towels or rags on the carpet to soak up excess water.
- Vacuum the carpet once it is dry to remove any remaining dirt or debris.
Drying Time
Drying time will vary depending on factors such as:
- Type of carpet
- Temperature and humidity of the room
- Amount of water used during cleaning
| Carpet Type | Drying Time |
|---|---|
| Polyester | 1-2 hours |
| Nylon | 2-4 hours |
| Wool | 3-6 hours |
Tips for Drying Faster
- Use a wet/dry vacuum to extract excess water from the carpet.
- Apply a carpet drying solution to draw moisture out of the fibers.
- Place a box fan on the carpet and direct it towards the wet area.
Emptying the Dirty Water Tank
Follow these steps to empty the dirty water tank:
- Unplug the cleaner from the electrical outlet.
- Disconnect the water supply hose from the faucet.
- Lift the dirty water tank out of the machine. The tank has a large handle on the top for easy lifting.
- Carry the tank to a sink or drain.
- Place the spout of the tank over the drain and pull up on the tab on the side to open the valve.
- Allow all the dirty water to drain out of the tank.
- Rinse the tank thoroughly with clean water to remove any remaining dirty water or cleaning solution.
- Close the valve on the tank and replace it in the machine.
| Step | Action |
|---|---|
| 1 | Unplug the cleaner |
| 2 | Disconnect the water supply hose |
| 3 | Lift out the dirty water tank |
| 4 | Carry the tank to a drain |
| 5 | Open the valve and drain the water |
| 6 | Rinse the tank thoroughly |
| 7 | Close the valve and replace the tank |
Cleaning and Maintaining the Bissell ProHeat
Cleaning
* Empty the clean water tank and dirty water tank.
* Rinse both tanks thoroughly with clean water.
* Fill the clean water tank with hot tap water and the appropriate amount of Bissell cleaning solution.
* Reattach the clean water tank to the machine.
Maintaining
1. Cleaning the Brush Roll
* Remove the brush roll from the machine.
* Cut away any hair or debris that is wrapped around the brush roll.
* Rinse the brush roll with clean water.
* Allow the brush roll to dry completely before reinstalling it.
2. Cleaning the Nozzle
* Remove the nozzle from the machine.
* Rinse the nozzle with clean water.
* Remove any debris that is clogging the nozzle.
* Reattach the nozzle to the machine.
3. Cleaning the Exterior
* Wipe down the exterior of the machine with a damp cloth.
* Do not use harsh chemicals or detergents.
4. Cleaning the Filter
* Remove the filter from the machine.
* Rinse the filter with clean water.
* Allow the filter to dry completely before reinstalling it.
5. Storing the Machine
* Empty the clean water tank and dirty water tank.
* Store the machine in a cool, dry place.
6. Troubleshooting
* If the machine is not working properly, refer to the user manual for troubleshooting tips.
7. Warranty
* The Bissell ProHeat comes with a one-year warranty.
* Register your machine online to activate the warranty.
8. Additional Tips
* For best results, use Bissell cleaning solution.
* Clean your carpets regularly to maintain their appearance and prevent dirt and allergens from building up.
* If you have pets, vacuum your carpets frequently to remove pet hair.
* Deep clean your carpets every 6-12 months to remove dirt and allergens that may have settled deep down in the carpet fibers.
Troubleshooting Common Issues
1. Carpet is Not Getting Clean
– Ensure the machine is using hot water and the correct cleaning solution.
– Check the brushroll for debris and remove any obstructions.
– Inspect the water jets and clear any clogs.
2. Machine is Leaking Water
– Tighten any loose fittings or hoses.
– Check the water tank for cracks or leaks.
– Inspect the drain hose for blockages or damage.
3. Machine is Not Spraying Solution
– Refill the solution tank.
– Check the solution hose for kinks or obstructions.
– Clean the solution nozzle to remove clogs.
4. Machine is Not Vacuuming Up Water
– Inspect the vacuum hose for tears or blockages.
– Check the dirty water tank for clogs or full capacity.
– Ensure the squeegee is properly aligned and not damaged.
5. Machine is Making Strange Noises
– Check for loose belts or pulleys.
– Lubricate moving parts as recommended in the manual.
– Inspect the brushroll for debris and remove any obstructions.
6. Machine is Not Turning On
– Check the power cord and outlet for connectivity.
– Ensure the power switch is turned on.
– Check the fuses or circuit breakers for the outlet.
7. Machine is Overheating
– Unplug the machine and allow it to cool for at least 30 minutes.
– Check the air vents for blockages and clean as necessary.
– Contact Bissell Support if overheating persists.
8. Machine is Leaving Streaks
– Ensure the squeegee is properly aligned and not damaged.
– Use the correct cleaning solution and water temperature.
– Rinse the carpet thoroughly with clean water after cleaning.
9. Machine is Not Picking Up Pet Hair
– Use the pet hair attachment specifically designed for pet hair removal.
– Vacuum the carpet thoroughly before using the carpet cleaner.
– Groom pets regularly to reduce shedding.
Prepare the Carpet
* Vacuum thoroughly to remove loose dirt and debris.
* Pretreat heavily soiled areas with the Bissell Carpet Cleaning Formula.
Fill the Machine
* Remove the clean water tank and fill it with hot tap water to the fill line.
* Add the appropriate amount of cleaning formula according to the instructions.
Attach the Cleaning Head
* Align the cleaning head with the machine base and snap it into place until it clicks.
Start Cleaning
* Turn on the machine and select the appropriate cleaning mode for your carpet type.
* Push the machine forward slowly and consistently to clean the carpet.
* Overlap passes slightly to ensure thorough coverage.
Rinse the Carpet
* Switch to the rinse mode and fill the clean water tank with clear water.
* Repeat the cleaning process to rinse the carpet and remove cleaning solution.
Empty the Dirty Water Tank
* Turn off the machine and unplug it.
* Disconnect the dirty water tank from the machine and empty it into a toilet or sink.
Clean the Machine
* Remove the brush roll from the cleaning head and rinse it with water.
* Wipe down the exterior of the machine with a damp cloth and dry it thoroughly.
Tips for Optimal Cleaning Results
1. Use the Correct Cleaning Formula
* Different carpet types require different cleaning formulas. Refer to the machine’s instructions or consult with a carpet care specialist.
2. Pretreat Heavily Soiled Areas
* Pretreating heavily soiled areas helps loosen tough stains and ensure thorough cleaning.
3. Move the Machine Slowly
* Cleaning too quickly may not allow the cleaning solution to fully penetrate the carpet fibers.
4. Overlap Passes
* Overlapping passes helps prevent streaks and ensures even cleaning.
5. Use the Appropriate Cleaning Mode
* Select the correct cleaning mode for your carpet type. Carpet cleaning modes vary based on water flow and brush agitation.
6. Rinse Thoroughly
* Rinsing thoroughly removes cleaning solution and prevents residue from attracting dirt.
7. Empty the Dirty Water Tank Frequently
* Emptying the dirty water tank prevents mixing clean and dirty water, leading to better cleaning results.
8. Clean the Brush Roll Regularly
* Cleaning the brush roll helps prevent dirt and debris buildup, which can reduce cleaning effectiveness.
9. Wipe Down the Machine Exterior
* Wiping down the machine exterior helps prevent dirt and cleaning solution buildup that can affect performance.
10. Maintain the Machine Regularly
* Regular maintenance, such as cleaning and inspecting components, helps extend the machine’s lifespan and ensure optimal cleaning performance.
How To Work A Bissell Proheat Carpet Cleaner
The Bissell Proheat Carpet Cleaner is a powerful machine that can remove dirt, stains, and allergens from your carpets. It is easy to use and can be rented from most hardware stores.
To use the Bissell Proheat Carpet Cleaner, follow these steps:
- Fill the clean water tank with hot water and add the recommended amount of carpet cleaning solution.
- Attach the cleaning head to the hose and insert the hose into the machine.
- Turn on the machine and select the desired cleaning mode.
- Pull the trigger on the cleaning head to start spraying cleaning solution onto the carpet.
- Move the cleaning head back and forth over the carpet, overlapping your strokes.
- Rinse the carpet by pulling the trigger on the cleaning head and spraying clean water onto the carpet.
- Extract the dirty water from the carpet by pushing the cleaning head forward and pulling it back.
- Repeat steps 5-7 until the carpet is clean.
- Empty the dirty water tank and rinse the clean water tank.
People Also Ask About How To Work A Bissell Proheat Carpet Cleaner
How do I clean a Bissell Proheat carpet cleaner?
To clean a Bissell Proheat carpet cleaner, follow these steps:
- Unplug the machine and remove the clean water tank and dirty water tank.
- Rinse the clean water tank and dirty water tank with clean water.
- Remove the cleaning head from the hose and rinse it with clean water.
- Wipe down the exterior of the machine with a damp cloth.
- Reassemble the machine and store it in a dry place.
How often should I clean my Bissell Proheat carpet cleaner?
You should clean your Bissell Proheat carpet cleaner after every use. This will help to prevent the build-up of dirt and debris, which can clog the machine and reduce its performance.
What type of carpet cleaning solution should I use with my Bissell Proheat carpet cleaner?
You should use a carpet cleaning solution that is specifically designed for use with Bissell Proheat carpet cleaners. Using the wrong type of carpet cleaning solution can damage the machine.
